纳米线组装叶片状三氧化钼的合成及其对三乙胺的气敏性能

通过溶剂热法制备了由一维纳米线自组装的叶状三氧化钼纳米材料，借助X射线衍射（XRD）、场发射扫描电子显微镜（FESEM）、透射电子显微镜（TEM）、高分辨透射电镜（HRTEM）、紫外-可见漫反射光谱（UV-Vis DRS）、热重-示差扫描量热（TG-DSC）、氮气吸附（N₂-sorption）等技术对材料进行了系统的组成和结构表征。结果表明，一维纳米线表面具有粗糙结构，且由一维纳米线组装的叶片状三氧化钼属畸变八面体中的正交晶系，其主要暴露的结晶面是（021）。此叶片状三氧化钼气敏材料在300℃的最佳工作温度下，对2.25 g·m^-3的三乙胺表现出优异的选择性、超高的灵敏度和较快的响应时间（5 s），甚至在浓度为4.5 mg·m^-3的检测标准下响应值仍可达到12.4。基于以上结构表征和性能测试结果，对叶片状三氧化钼的形成及三乙胺敏感机理进行了初步探讨分析。     

Biomimetic Approach for Highly Selective Artificial Water Channels Based on Tubular Pillar[5]arene Dimers

Artificial water channels mimicking natural aquaporins (AQPs) can be used for selective and fast transport of water. Here, we quantify the transport performances of peralkyl-carboxylate-pillar[5]arenes dimers in bilayer membranes. They can transport ≈10⁷ water molecules/channel/second, within one order of magnitude of the transport rates of AQPs, rejecting Na⁺ and K⁺ cations. The dimers have a tubular structure, superposing pillar[5]arene pores of 5 Å diameter with twisted carboxy-phenyl pores of 2.8 Å diameter. This biomimetic platform, with variable pore dimensions within the same structure, offers size restriction reminiscent of natural proteins. It allows water molecules to selectively transit and prevents bigger hydrated cations from passing through the 2.8 Å pore. Molecular simulations prove that dimeric or multimeric honeycomb aggregates are stable in the membrane and form water pathways through the bilayer. Over time, a significant shift of the upper vs. lower layer occurs initiating new unexpected water permeation events through toroidal pores.     

平面波输入下海水-海床-结构动力相互作用分析

海洋工程结构的地震反应分析是保证海洋工程结构地震安全的重要环节.由于其所处的复杂环境, 该问题涉及到流固耦合和土-结相互作用.本文基于海水、饱和海床、基岩流固耦合统一计算框架,采用Davidenkov模型和修正的Masing准则考虑饱和海床的非线性,在脉冲SV波垂直入射下, 进行了海域场地和海洋工程结构的动力响应分析. 首先,对比分析了线性自由场和非线性自由场输入情形的海域场地非线性反应,结果表明线性自由场输入时反应不合理,自由场分析和场地分析应该采用相一致的本构模型. 然后,对比分析了海床分别为线性和非线性情形时,海域场地以及海水-海床-结构体系的反应特征. 与线性海床情形相比,非线性对海床反应的影响主要由如下两方面因素控制: 一方面,非线性导致饱和海床模量减小, 饱和海床与基岩间的波阻抗比减小,由基岩到饱和海床间的反射系数和透射系数增加, 导致反应增大; 另一方面,非线性导致阻尼加大, 使海床反应减小. 对于本文算例而言,阻尼对非线性海床结果的影响占主导作用.      

Facile synthesis of linear–hyperbranched polyphosphoesters via one‐pot tandem ROMP and ADMET polymerization and their transformation to architecturally defined nanoparticles

A convenient one‐pot synthesis of linear–hyperbranched polyphosphoesters (l–HBPPEs) was accomplished by a tandem ring‐opening metathesis polymerization (ROMP) and acyclic diene metathesis (ADMET) polymerization procedure. A linear monotelechelic poly(norbornene) with a terminal acrylate and many pendent thiol groups is first prepared through adding an internal cis‐olefin terminating agent to the reaction mixture immediately after the completion of the living ROMP, and then utilized as a macromolecular chain stopper in subsequent ADMET polymerization of a phosphoester functional AB₂ monomer, yielding l–HBPPEs as the reaction time prolonged. These l–HBPPEs bearing lots of pendent thiol groups in linear poly(norbornene) and peripheral acrylate groups in HBPPE could be self‐crosslinked in ultradilute solution through thiol‐Michael addition click reaction between acrylate and thiol to give single‐molecule nanoparticles with comparatively uniform size. This facile approach can be extended toward the fabrication of novel nanomaterials with sophisticated structures and tunable multifunctionalities. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 964–972     

Ion transport in polymerized lyotropic liquid crystals containing ionic liquid

In this work, we investigate the effect of morphology and segmental dynamics on ion transport in polymerized lyotropic liquid crystals (polyLLCs) containing 1-butyl-3-methylimidazolium tetrafluoroborate as ionic liquid (IL). We demonstrate that two important factors, which affect ion conduction in polyLLCs, are grain size and chain density at the interface. The polyLLC with large grain size (70 nm) shows significant reduction in ion conductivity (one order of magnitude) compared to its homopolymer/IL mixture. However, the polyLLC with small grain size (20 nm) has little difference in ion conductivity compared to its homopolymer/IL mixture. It is observed that decreasing the chain density enhances the interaction of IL with polymer chains and consequently slows the relaxation of polymer chains. In addition, comparing the dynamics of polymer chains in mixtures of homopolymer/IL and templated LLC mesophases shows that the confinement in LLC structure prolongs the relaxation of polymer chains.     

Review on the Use of Artificial Intelligence to Predict Fire Performance of Construction Materials and Their Flame Retardancy

The evaluation and interpretation of the behavior of construction materials under fire conditions have been complicated. Over the last few years, artificial intelligence (AI) has emerged as a reliable method to tackle this engineering problem. This review summarizes existing studies that applied AI to predict the fire performance of different construction materials (e.g., concrete, steel, timber, and composites). The prediction of the flame retardancy of some structural components such as beams, columns, slabs, and connections by utilizing AI-based models is also discussed. The end of this review offers insights on the advantages, existing challenges, and recommendations for the development of AI techniques used to evaluate the fire performance of construction materials and their flame retardancy. This review offers a comprehensive overview to researchers in the fields of fire engineering and material science, and it encourages them to explore and consider the use of AI in future research projects.     

A Selective Sulfide Oxidation Catalyzed by Heterogeneous Artificial Metalloenzymes Iron@NikA

Performing a heterogeneous catalysis with proteins is still a challenge. Herein, we demonstrate the importance of cross-linked crystals for sulfoxide oxidation by an artificial enzyme. The biohybrid consists of the insertion of an iron complex into a NikA protein crystal. The heterogeneous catalysts displays a better efficiency-with higher reaction kinetics, a better stability and expand the substrate scope compared to its solution counterpart. Designing crystalline artificial enzymes represents a good alternative to soluble or supported enzymes for the future of synthetic biology.     

核电结构土-结相互作用分析分区混合计算方法

土-结构相互作用分析是核电结构进行抗震设计和安全评估的重要环节.在核电结构的土-结相互作用分析中,阻尼和非线性是影响结构反应的重要因素. 若采用频域分析,可以方便考虑阻尼,但需通过等效线性化来考虑非线性,不适合于强震作用下的土体非线性.若采用时域分析的逐步积分方法,适合于考虑非线性,但材料阻尼一般采用瑞利阻尼模型,除了紧靠指定阻尼比的少数几个振型外,其他振型的反应将受到瑞利阻尼模型所确定的大阻尼所抑制,造成地震反应与真实情形有较大差异.若采用时域分析的模态叠加法,可合理计入阻尼效应,但模态叠加法不能考虑非线性.因此,如何合理考虑阻尼和非线性是核电结构土-结相互作用分析需要关注的问题.基于此,本文提出一种模态叠加和时步积分结合的土-结相互作用分区算法.其中,出于安全性考虑,地震作用下核电主体结构一般不允许进入非线性,因此结构可采用模态叠加方法,以便合理考虑结构阻尼;土体和基础采用显式时步积分法,可考虑土体非线性;通过人工边界条件考虑无限域的影响 (辐射阻尼).通过简单算例对该方法进行了验证,并用于CAP1400核电结构的土-结相互作用分析中,对比分析了采用模态阻尼和瑞利阻尼时核电结构和场地反应的差异,结果表明结构阻尼模型对场地的反应影响不大,但对结构反应影响明显,在实际工程中应合理选取阻尼模型.      

Artificial neural network‐based modeling of snow properties using field data and hyperspectral imagery

This study attempts to model snow wetness and snow density of Himalayan snow cover using a combination of Hyperspectral image processing and Artificial Neural Network (ANN). Initially, a total of 300 spectral signature measurements, synchronized with snow wetness and snow density, were collected in the field. The spectral reflectance of snow was then modeled as a function of snow properties using ANN. Four snow wetness and three snow density models were developed. A strong correlation was observed in near‐infrared and shortwave‐infrared region. The correlation analysis of ANN modeled snow density and snow wetness showed a strong linear relationship with field‐based data values ranging from 0.87–0.90 and 0.88–0.91, respectively. Our results indicate that an Artificial Intelligence (AI) approach, using a combination of Hyperspectral image processing and ANN, can be efficiently used to predict snow properties (wetness and density) in the Himalayan region. Recommendations for resource managers

• Snow properties, such as snow wetness and snow density are mainly investigated through field‐based survey but rugged terrains, difficult weather conditions, and logistics management issues establish remote sensing as an efficient alternative to monitor snow properties, especially in the mountain environment.
• Although Hyperspectral remote sensing is a powerful tool to conduct the quantitative analysis of the physical properties of snow, only a few studies have used hyperspectral data for the estimation of snow density and wetness in the Himalayan region. This could be because of the lack of synchronized snow properties data with field‐based spectral acquisitions.
• In combination with Hyperspectral image processing, Artificial Neural Network (ANN) can be a useful tool for effective snow modeling because of its ability to capture and represent complex input‐output relationships.
• Further research into understanding the applicability of neural networks to determine snow properties is required to obtain results from large snow cover areas of the Himalayan region.